ماژول شیلد کنترل دمای هوشمند دیجیتال HW-559
ماژول شیلد کنترل دمای هوشمند دیجیتال HW-559. این ماژول یک میکروکنترلر پر سرعت با شش نمایشگر سون سگمنت دارد. که به راحتی تنظیم میشود و دامنه دمایی آن از -۹ تا ۹۹ درجه سانتیگراد می باشد. بطوریکه منبع تغذیه DC 12V را وصل کنید، بار را به صورت سری به رله وصل کنید. و سپس دستگاه را روشن کنید. آنگاه دمای واقعی در نمایشگر سون سگمنت بزرگ نمایش داده میشود. در نتیجه با توجه به نیاز، محدوده شروع و پایان دمایی را مشخص کنید.
- • ℃Temperature range: -9 to 99
- • ℃Accuracy: 1
- • ℃Control accuracy: 1
- • ℃Setting Range: -9 to 99
- • Refresh rate: 0.5S
- • Input Power: DC12V
- • Output: relay output, capacity 220V 10A / 12V 10A
- • Temperature sensor: NTC(3950-10k 1%)
HW-559 Digital Display Intelligent Thermostat Temperature Controller Temperature Module
High temperature start-cooling mode: when the start temperature value is set> the stop temperature value, when the detected temperature ≥ the start temperature,while the relay is closed and the refrigeration equipment works; when the detected temperature ≤ the stop temperature, the relay is turned off and the refrigeration equipment stops working . For example: set the start temperature to 30 ° C and the stop temperature to 25 ° C. When the detected temperature value ≥ 30 ° C, the relay closes and the start indicator (red) lights; when the detected temperature value ≤ 25 ° C, the relay opens and the stop indicator (Green) lights up.
Low temperature start-heating mode: when the start temperature value is set <the stop temperature value, when the detected temperature ≤ the start temperature, the relay is closed and the heating device works; when the detected temperature ≥ stop temperature, the relay is disconnected and the heating device stop working. For example: set the start temperature to 25 ° C and the stop temperature to 30 ° C. When the detected temperature value is ≤25 ° C, the relay closes and the start indicator (red) lights; when the detected temperature value ≥30 ° C,in summary the relay opens and the stop indication The light (green) lights up.
- Left side seven segment to set the start temperature
- Right side seven segment to stop temperature